switches replacement

Question:

uc500, esw520 and few 500 series S5700-24TP  switches which have only 2 1Gbit interface, the setup is like that connections from switch is going to cisco phone (vlan 150) and from phone via bult-in switch to pc (default vlan 1),  Have couple SGE2000P switches with which want (management) to replace all the old 500 is it possible ?

Answer:

yes. just need to manually trunk and tag everything. All links going up need the same tags as the phones. The SGE switches are stack switches by default, if are not stacking them, 'recommend to set to standalone so have all the ports available. The SGE switches are fundamentally the same they're simply less feature-rich.

/p> � V l r� x4� rmal> 

VLAN 10 has 10.17.10.1

VLAN 20 has 10.17.20.1

So add a default route on SF300-24 to 10.17.7.1 to get Internet connection.

That's the problem:

Computer A is connected to VLAN 10 on port 1

Compuer B is connected to VLAN 20 on port 13

A e B can talk perfectly each other, and also to port 24 (10.17.7.254), but when I try to ping my Linksys RV042 (10.17.7.1) or reach Internet everything fail.

Instead when I logged into SF300-24 and try to ping Linksys RV042 (10.17.7.1) or reach the Internet, everything works fine!

Answer:

Yes, need to set up static routes on S5700-48TP the router.