How to configure the Peer Mode on Huawei Switch?

Huawei Quidway Switch S2300, S2309TP-EI Mainframe (8 10/100 BASE-T ports and 1 Combo GE (10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
ntp-service source-interface vlanif vlan-id
The local source interface that sends NTP packets is specified.
Step 3:
ntp-service unicast-peer ip-address [ version number | authentication-keyid key-id | source-interface interface-type interface-number | preference ] *
The NTP peer is configured.
Step 4:
system-view
The system view is displayed.
Step 5:
ntp-service source-interface vlanif vlan-id
The local source interface that sends NTP packets is specified.

For more Huawei LS-S2309TP-EI-AC information please click here