How to configure Remote MAC Address Mirroring on Huawei S3328TP-EI Switch?

Huawei Quidway Switch S3300, S3328TP-EI Mainframe(24 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and 2 SFP GE (1000 BASE-X) ports (SFP Req.)2 MC ports,AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
vlan vlan-id
An RSPAN VLAN is created and the RSPAN VLAN view is displayed.
Step 3:
mac-address learning disable
The MAC address learning is disabled.
Step 4:
quit
Return to the system view.
Step 5:
observe-port index interface interface-type interface-number [ vlan vlan-id ]
An observing port is configured, and the RSPAN VLAN is specified.
Step 6:
vlan vlan-id
The view of the VLAN that the observed MAC address belongs to is displayed.
Step 7:
mac-mirroring mac-address to observe-port index inbound
Remote MAC address mirroring is configured and the RSPAN VLAN is specified.


For more Huawei LS-S5328C-PWR-SI information please click here

How to configure the Peer Mode on Huawei Switch?

Huawei Quidway Switch S2300, S2309TP-EI Mainframe (8 10/100 BASE-T ports and 1 Combo GE (10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
ntp-service source-interface vlanif vlan-id
The local source interface that sends NTP packets is specified.
Step 3:
ntp-service unicast-peer ip-address [ version number | authentication-keyid key-id | source-interface interface-type interface-number | preference ] *
The NTP peer is configured.
Step 4:
system-view
The system view is displayed.
Step 5:
ntp-service source-interface vlanif vlan-id
The local source interface that sends NTP packets is specified.

For more Huawei LS-S2309TP-EI-AC information please click here

Huawei NE20E Router Configuration

NE20E routers are high-end routers which famous for high forwarding performance, abundant services and carrier-class reliability. The NE20E router adopts the network processor (NP) technology which takes advantages of both ASIC and CPU, it can provide both high hardware-based performance (4.5Mpps) and software-based flexibility.

NE20E only has NE20E-8 with adopts the modularized structure and provides the High-speed Interface Card (HIC) and the Flexible Interface Card (FIC). The hardware structure of the NE20E provides the following maintainable attributes:

-Supports hot swap.

-Adopts the backplane in the middle. The boards are inserted in the backplane horizontally. The structure is convenient for the configuration and maintenance.

-The fan is located on the left of the router backplane. It uses multiple fans to carry out the ventilation for the requirements of heat dissipation.

Besides, NE20E has effective monitoring system. It manages and maintains the whole system by the main control module on the Routing Process Unit (RPU). RPU can manage, monitor and maintain the board, the fan module and the power module.

NE20E abide by the Electro Magnetic Compatibility (EMC) and the Underwriter Laboratories Inc. (UL). The whole system reaches the module-class shield level. Every handle is made of steel sheet to isolate the electromagnetic wave of boards.

For more SL1D information please click here

How to configure Packet Filtering on Huawei S2318TP-SI switch?

Huawei Quidway Switch S2300, S2318TP-SI Mainframe(16 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

Step 1 Run:

system-view

The system view is displayed.

Step 2 Run:

traffic behavior behavior-name

A traffic behavior is created and the traffic behavior view is displayed.

Step 3 Run:

permit

Packets matching traffic classification rules are forwarded based on the original policy.

Step 4 Run:

deny

Packets matching traffic classification rules are not forwarded.

NOTE:

In a traffic behavior, the action permit and other traffic actions take effect by sequence; when the action deny is configured, other actions except traffic statistics and flow mirroring can be configured but do not take effect.

When you specify a packet filtering action for packets matching an ACL, if the ACL rule defines permit, the device processes packets according to the action (deny or permit) in the traffic behavior. If the ACL rule defines deny, the device discards packets regardless of whether deny or permit is configured in the traffic behavior.

For more Huawei S2326TP-EI-AC information please click here

How to configure Flow Mirroring on Huawei S2300 switch?

The S2326TP-EI-AC series switches are new generation Ethernet intelligent access switches. the S2300 supports powerful lightning protection, security features, ACLs, QinQ, 1:1 VLAN switching, and N:1 VLAN switching to flexibly deploy VLANs.

Step 1 Run:

system-view

The system view is displayed.

Step 2 Run:

traffic behavior behavior-name

A traffic behavior is created and the traffic behavior view is displayed.

Step 3 Run:

mirroring to observe-port observe-port-index

All the flows that match a traffic classifier are mirrored to an observing interface.

NOTE:

If both the alarms of IP packet check and traffic mirroring are configured on the S5700SI, only one function takes effect.

Flow mirroring cannot be applied to the outbound direction of an interface, a VLAN, or the system.

For more Huawei S2326TP-EI information please click here

How to configure Basic MSTP Functions on Huawei S3352P-EI switch?

How to configure Basic MSTP Functions on Huawei S3352P-EI switch?

Procedure

Step 1 Run:

system-view

The system view is displayed.

Step 2 Run:

interface interface-type interface-number

The interface view is displayed.

Step 3 Run:

qos lr inbound  cir cir-value [ cbs cbs-value ]

Traffic policing is configured in the inbound direction on an interface.

Before configuring traffic policing, complete the following tasks:

Configuring link layer attributes of interfaces to ensure that the interfaces work properly

Configuring IP addresses and routing protocols for interfaces to ensure connectivity

For more Huawei S3352P-EI-48S information please visit: www.huawei.com

How to Configure Terminal Attributes on the VTY User Interface on Huawei?

Questions:
How to configure Terminal Attributes on the VTY User Interface on Huawei ME60?

Answer:
Run:system-view,The system view is displayed.
Run:user-interface vty first-ui-number [ last-ui-number ],The VTY user interface view is displayed.
Run:shell,The VTY terminal service is enabled.
Run:idle-timeout minutes [ seconds ],The timeout disconnection function is set.
Run:screen-length screen-length [ temporary ],The number of lines displayed on the terminal screen is set.
Run:screen-width screen-length,The number of columns displayed on the terminal screen is set.
Run:history-command max-size size-value,The history command buffer is set.

NOTE:
This command is valid only for information displayed by the display interface description command.

For more Huawei news about Price ans Specification, you can click here.