Huawei Switch : Huawei 3352-si zone configuration problem

The S3328TP-EI -si configuration time synchronization

Ntp-service unicast-server 61.129.42.44

Time synchronization into.

But the time zone

[HW-3352-SI]dis clock

2013-04-07 02:54:59

Sunday

Time Zone: Beijing add 08:00:00

After the time synchronization is America time.

Time zone changes.

Clock timezone Beijing add 8

But this time is not the East District 8, west area 8. How to identify for the east area eight?

Dis ver version of the following:

Huawei Versatile Routing Platform Software

VRP (R) Software, Version 5.30 (S3300 V100R002C01B070)

Quidway S3352P-SI uptime is 0 day, 0 hour, 0 minute

[Slot 0] EMFEA uptime is 0 day, 0 hour, 0 minute

Startup time: 2008/01/01 00:00:43

128M bytes DDR Memory

16M bytes FLASH

Pcb Version: CX22EMFEA REV A

Basic BOOTROM Version: 120 Compiled at Dec 212008, 00:32:49

Software Version: VRP (R) Software, Version 5.30 (S3300 V100R002C01B070)

Step 1 executes the command clock datetime HH:MM:SS YYYY-MM-DD, set the current time.

Step 2 executes the command clock timezone time-zone-name {add minus} offset |, set thetime zone.

L add will increase the time zone offset specified in UTC standard time. That is, in the default system UTC

The foundation of the District, plus offset, can be identified by the time-zone-name time.

L minus will specify the time zone offset subtracting based on UTC standard time. That is, in the default system UTC

Time basis, minus offset, LS-S3328TP-EI-24S-AC can be identified by the time-zone-name time

Huawei Switch