How to Configure Load Balancing in a Smart Link Group on Huawei S5700?

Questions:
How to configure Load EPBC Balancing in a Smart Link Group on Huawei Quidway S5700?

Answer:

Run:system-view,The system view is displayed.
Run:stp region-configuration,The Multiple Spanning Tree (MST) region view is displayed.
Run:instance instance-id vlan { vlan-id1 [ to vlan-id2 ] }&<1-10>,The mapping between an instance and VLANs is set.A domain supports up to 49 instances, among which Instance 0 is the default instance and does not need to be created.By default, all VLANs are mapped to instance 0.
Run:active region-configuration,The configuration of the MST region is activated.,After configuring the domain name, VLAN mapping table, or MSTP revision level, you must run the active region-configuration command for the configuration to take effect.
Run:quit,Return to the system view.
Run:smart-link group group-id,The Smart Link group view is displayed.
Run:load-balance instance { instance-id1 [ to instance-id2 ] } &<1-10> slave,Packets of the VLANs bound to the specified instance are sent from the slave interface to implement load balancing.

For more Huawei Switch news about Price EPBD ans Specification, you can click here.