How to Configure IGMP Snooping Querier on Huawei S2700?

Questions:

How to configure IGMP MA5616 Snooping Querier on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:vlan vlan-id,The VLAN view is displayed.
Run:igmp-snooping querier enable,The IGMP snooping querier is enabled for the VLAN.By default, an IGMP snooping querier is disabled.
Run:igmp-snooping query-interval query-interval,The interval at which the querier sends IGMP General Query messages is set.By default, the interval for sending IGMP General Query messages is 60 seconds.
Run:igmp-snooping robust-count robust-count,The robustness variable of the querier is set.By default, the robustness variable is 2.
Run:igmp-snooping max-response-time max-response-time,The maximum response time of IGMP Query messages is set.By default, the maximum response time of IGMP Query messages is 10 seconds.
Run:igmp-snooping lastmember-queryinterval lastmember-queryinterval,The interval at which the querier sends Last Member Query (IGMP Group-Specific Query) messages is set.By default, the interval at which IGMP Group-Specific Query messages are sent is 1 second.

NOTE:
The maximum response time must be shorter than the interval at which IGMP General Query messages are sent.
After receiving IGMP Report messages from hosts, the S2700 sets the aging time of member interfaces based on the following formula: IGMP robustness variable x Interval at which IGMP General Query messages are sent + Maximum response time of IGMP Query messages. If all the parameters are of the default value, the aging time of member interfaces defaults to 130 seconds.

After receiving IGMP Leave messages from hosts, the S2700 sets the aging time of member interfaces by using the following formula: Interval at which IGMP Group-Specific Query messages are sent x IGMP robustness variable.
IGMPv1 hosts do not send Leave messages when leaving multicast groups. Therefore, the igmp-snooping lastmember-queryinterval command is valid only when the IGMP snooping version is set to 2 in the VLAN.

For more Huawei Switch news MA5612 about Price ans Specification, you can click here.